Everyone knows the steps of 3D printing: design, slicing, 3D printing after which? Though it’s a crucial stage, the final step, post-processing, or all of the totally different processes and strategies which are used after the printing of an element to optimize an element and guarantee it really works correctly, is much much less mentioned than the others. But when additive manufacturing goes to proceed to industrialize, and powder-based processes particularly proceed to be necessary, post-processing should not be ignored. Enter AM Effectivity. The Swedish model has devoted itself to make easy-to-use, all-in-one options which are automating and simplifying post-processing. We spoke with the brand new CEO, Casper Rósen, to be taught extra concerning the firm, its options and what’s usually ignored on the subject of post-processing.
3DN: May you introduce your self and your connection to 3D printing?
My title is Casper Rosén, I’m the brand new CEO of AM Effectivity. Since my time as a co-founder of a 3D/AM worth including reselling firm greater than +12 years in the past, I’ve been astonished and completely satisfied concerning the potential inside AM and 3D printing. In my profession, I’ve labored with all forms of applied sciences from FDM to MJF and between and know the capabilities and potentialities but in addition the challenges every approach can deliver.
Casper Rosén, the brand new CEO, of AM Effectivity
I’ve been lucky to be part of profitable AM tales many occasions. That is when folks and corporations handle to seek out the precise answer for his or her wants and develop their circumstances or merchandise and discover new concepts to success. It does probably not matter if it’s a small and easy half or a large-scale superior mission, it provides you a lift and inspiration every time. And this has continued to drive my love of those applied sciences.
3DN: How did AM Effectivity come about?
Whenever you consider powder-based additive manufacturing, a significantly massive a part of these processes consists of the post-processing of the components. Nevertheless, this work is usually underestimated by way of labor, time, price, high quality, ergonomics and so on. As such, it stands with out saying that in case you can carry out this course of extra effectively and sooner, at a top quality and at a decrease price, you may make these applied sciences far more aggressive. That is the place AM Effectivity is available in.
When the corporate began, we already had all of the know-how about AM, design for AM and the AM market out there in-house (together with intensive data of various SLS manufacturers and HP MJF), this made the step in direction of designing and constructing our personal product not simply attainable however virtually essential to take. To realize repeatability in your manufacturing, it’s key to have an automatic course of. That’s how AM Effectivity was born.
Ulf Qviberg, CTO and Founding father of AM Effectivity with one of many firm’s post-processing options
The mission for AM Effectivity is to ship prime quality automated merchandise for post-processing of 3D printed components to maneuver AM ahead sooner. Our merchandise are constructed for AM with the goal of giving repeatability of components at an inexpensive price. Everybody within the firm is devoted to AM and we have now gathered a really excessive degree of information and expertise in 3D printing and mixed applied sciences.
3DN: What is usually ignored on the subject of post-processing?
There are numerous issues usually ignored on the subject of post-processing of 3D printed components. My private expertise is that this subject is one thing 3D printer producers usually keep away from speaking about an excessive amount of. It is because generally, post-processing, although it’s time-consuming work, has a huge effect on the prepared half.
AM Effectivity’s options are easy-to-use and make post-processing automated and easy
As a lot as 30 p.c of the full price of an element could be associated to the post-processing. When this work is carried out manually, it’ll enhance the danger of getting non-consistent high quality of your components. The guide work has numerous ergonomic and environmental elements to contemplate and it might probably even be dangerous in case you don’t think about this correctly.
3DN: What wants is AM Effectivity filling available on the market?
Our focus is to develop tools related to the market. From our perspective, there’s a hole from the place the AM market is at present and the place it might have been. We consider that one of many causes are associated to the truth that the post-processing has probably not been dealt with severely or at the very least been underestimated by way of time, price, high quality and so on. We additionally consider that the results of that is mirrored in pointless excessive pricing of components, that are at a lower-than-expected high quality degree. This holds again all the 3D printing market.
Efficient post-processing ensures that the ensuing 3D printed components are prime quality, seen right here with the components from AM Effectivity
In our every day work we design, print and post-process our components which just about routinely give us the very best testbed for our merchandise and wishes within the course of. We use AM the place AM needs to be used and that’s what we wish to share with our prospects.
3DN: As the brand new CEO, what are your plans for the corporate?
As a brand new CEO of AM Effectivity, I intend to proceed the journey that the founder Ulf Qviberg began. As Ulf continues to be working as CTO within the firm, we have now a robust basis to maintain constructing on. Our objective is in fact to develop and we’ll concentrate on discovering new markets and companions to make this occur.
We are going to proceed our work to develop new merchandise but in addition enhance options in our present portfolio. We have now a transparent roadmap of a number of launches forward and we have now a robust concentrate on innovation and sustainability. We’re able to be the pure accomplice of anybody who wants post-processing options for powder-based processes!
We are going to quickly launch a brand new machine and through this 12 months we hope to current a good bigger product portfolio. We additionally anticipate to enter market areas the place we’re not represented at present.
3DN: Any final phrases for our readers?
The AM world is evolving, we’re fairly removed from the purpose the place every part is invented and developed. Whenever you enter the AM world it’s simple to suppose that every part is about, however I consider we’re nonetheless to start with. However simply in the previous few years the steps taken in post-processing have been fairly lengthy and it’s very thrilling to be a part of shaping the AM world by higher options. The AM world deserves to develop and we’re a part of making it occur. If you wish to sustain, remember to be taught extra about us and get in contact HERE.
What do you consider AM Effectivity and its options for post-processing? Tell us in a remark under or on our LinkedIn, Fb, and Twitter pages! Don’t neglect to join our free weekly publication right here for the most recent 3D printing information straight to your inbox! You can even discover all our movies on our YouTube channel.