3D Printing Webinar and Occasion Roundup: April 7, 2024 – 3DPrint.com

Webinars and occasions within the 3D printing business are choosing again up this week! Sea-Air-Area is coming to Maryland, and SAE Worldwide is sponsoring a 3D Techniques webinar about 3D printing in transportation. APS Conferences are going down in France, the Superior Factories Expo involves Barcelona, Stratasys continues its superior coaching programs, and extra. Learn on for all the small print!

3D Printing Information Unpeeled

Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at Additive Manufacturing Analysis (AMR), affords a information livestream one to 2 instances every week referred to as 3D Printing Information Unpeeled at 9:30 am EST. For every episode, Peels will get on LinkedIn Reside and tells us, in 20 minutes or much less, what he considers to be the highest information tales from the 3D printing business that week, and why they’re essential. Among the tales in his roundup are ones we’ve lined at 3DPrint.com, and a few are usually not, however they’re all equally attention-grabbing and impactful!

April 8 – 10: Sea-Air-Area

The Sea-Air-Area Exposition, powered by the U.S. Navy League, is the nation’s premiere maritime occasion, welcoming navy decision-makers and protection business leaders to Maryland from April 8-10 to debate the newest updates within the maritime sector. 16,000 attendees are anticipated, and there will likely be 4 exhibit experiences, together with a STEM Expo, 57 worldwide delegations, networking alternatives, and far more. There will likely be 430 exhibitors at this yr’s Sea-Air-Area, together with acquainted names like Airbus, Markforged, Boeing, ADDMAN, Snowbird Applied sciences, GE Aerospace, the Workplace of Naval Analysis, and lots of extra.

“With top-tier audio system and occasions highlighting every of the three days, Sea-Air-Area is a should attend for anyone invested in the way forward for U.S. maritime superiority.”

You’ll be able to be taught extra about Sea-Air-Area 2024 right here.

April 8: MatterHackers Joyful Hour with Constructing Momentum

The primary evening of Sea-Air-Area, MatterHackers and Constructing Momentum are co-hosting a networking pleased hour occasion simply quarter-hour away, on the Backyard Alexandria in Virginia. Nevertheless, you don’t need to registered for the exposition to attend the pleased hour! Constructing Momentum, a coaching group centered on electronics, drones, coding, 3D printing, and extra, can be positioned in Alexandria, and its facility has occasion areas, coaching areas for teenagers and adults, workshops, and extra. The Phillips Additive Hybrid steel 3D printing and CNC gadget, which the group examined for the US Navy, can be onsite, together with a number of different attention-grabbing manufacturing machines.

“Come and meet with of us from the neighborhood who’re additionally doing additive manufacturing within the DoD. Or come and simply learn to become involved. Occasion isn’t just for DoD and is open to all within the space.”

You may get a ticket to the pleased hour right here.

April 9: Superior Manufacturing Expertise Day

This Tuesday, April ninth, 3D printer reseller 3DOLOGiE is becoming a member of with 3D measurement expertise chief Creaform to carry Superior Manufacturing Expertise Day from 10 am till 6 pm CDT in Cellular, Alabama at Innovation Portal, a nonprofit incubator and innovation hub. The day will start with a drop-in workforce growth session, adopted by knowledgeable luncheon. After lunch, a drop-in enterprise professionals session will happen, and the occasion will shut with a contented hour.

“Community with Additive Manufacturing and Metrology specialists, Innovation Portal startups, native companies, and study business developments.”

You should buy tickets for the occasion right here.

April 9: 3D Printing for Transportation

In the event you’re curious in regards to the newest developments in 3D printing for transportation functions, be a part of 3D Techniques at 11 am EST on the ninth for a “Tech Replace: 3D Printing for Transportation in 2024,” sponsored by SAE Worldwide. The dialogue will likely be moderated by Amanda Hosey, Editor, SAE Media Group. Attendees will study related functions, like floor texturing and eggshell molding for silicon components, in addition to the affect of 3D printing on transportation OEMs and tiered suppliers, particular materials check knowledge for transportation producers, and extra. After the technical presentation by Richard Broad, Product Supervisor Supplies, 3D Techniques, there will likely be an viewers Q&A session.

“Immediately, OEMs and tiered suppliers face growing stress to swiftly introduce improvements in street and rail. With the proliferation of applied sciences and suppliers in additive manufacturing (3D printing), acquiring an outline of the newest developments poses challenges for designers, engineering heads, operations, and additive manufacturing professionals.”

You’ll be able to register for this tech replace right here.

April 9 – 10: APS Conferences

The twelfth version of APS Conferences by Superior Prototyping Options will likely be held in Lyon, France from April 9-10. This enterprise conference is devoted to additive manufacturing, fast prototyping, 3D printing, and product growth, and offers suppliers the prospect to fulfill with contractors from a wide range of industries, together with medical, aerospace, automotive, rail, protection, and extra. Final yr, over 160 firms participated in these conferences, which have a singular format based mostly on B2B conferences. A number of acquainted names from the AM sector will likely be exhibiting at APS Conferences, together with BigRep, Erpro Group, Materialise, Nikon SLM Options, PostProcess Applied sciences, and extra.

“With its distinctive idea based mostly on pre-selected and pre-planned 40 minutes BtoB conferences, APS Conferences is probably the most environment friendly means for companies to community and interact cooperation: from gear acquisition to R&D and Engineering providers, via additive manufacturing and prototyping sub-contracting providers, together with uncooked materials provide.”

You’ll be able to register for the APS Conferences right here.

April 9 – 11: Stratasys Continues Superior Coaching

Stratasys continues its superior coaching programs this week, with choices in each its U.S. and EMEA areas. First, from April September 11, “P3 Superior Operations” for Origin One prospects will likely be held on the firm’s North American subsidiary headquarters in Minnesota, adopted by “SAF Superior Operations Coaching” for Stratasys H350 customers from April 10-11, additionally in Minnesota. The ultimate course providing this week, “PolyJet Superior Operations Coaching,” will likely be from April September 11 on the firm’s German headquarters.

“Take a look at the newest class schedule for all of our 3D printing platforms!”

These programs will likely be provided at each areas on future dates, so keep watch over the Stratasys coaching web page.

April 9 – 11: Superior Factories in Barcelona

In Barcelona, additionally from April September 11, the Superior Factories Expo & Congress will likely be held. This worldwide commerce present about industrial innovation and Trade 4.0 showcases the newest options in robotics, IoT, cybersecurity, synthetic intelligence (AI), industrial software program, machine studying, automation programs, additive manufacturing, and extra. There will likely be a number of particular actions on the occasion, such because the Trade Startup Discussion board, guided Tech Excursions, and the Automotive Innovation Nook, along with the exhibition corridor. A number of AM business firms that will likely be exhibiting on the occasion embody HP 3D Printing, 3DZ, Meltio, and Sicnova.

“Discover out the newest advances and cutting-edge expertise that may rework factories into digital factories as a consequence of using superior expertise. Encourage your self with the most recent innovation and learn to optimize your online business.”

You should buy a move to Superior Factories right here.

April 9 – 12: ceramitec 2024

At Messe München in Germany from April 9-12, you’ll be able to be taught all about ceramics on the ceramitec 2024 commerce honest, which covers the business’s complete spectrum. Attendees can uncover the newest developments, merchandise, and applied sciences on the present, all whereas making essential contacts that might result in new enterprise. Featured exhibition areas at ceramitec embody superb and refractory ceramics, heavy clay, uncooked supplies, powder metallurgy, and technical ceramics. You’ll additionally acknowledge some AM business firms on the exhibition ground, together with Lithoz, 3DCeram, Desktop Metallic, and CONCR3DE Printing.

“In these risky instances, ceramitec affords market orientation and serves as a development barometer. In mild of the various challenges presently going through the ceramics business, ceramitec exhibitors will current the options which might be urgently wanted. Whether or not decarbonization, digitalization, power effectivity or inexperienced applied sciences – ceramitec affords the suitable solutions to all present developments.”

You should purchase a ticket to ceramitec 2024 right here.

April 10: AddUp’s DED Expertise Day

AddUp is holding a DED Expertise Day in Augsburg, Germany this Wednesday, April tenth, along with co-host MT Aerospace AG and assist from Siemens. Attendees will get to broaden their data of directed power deposition (DED) expertise via keynotes, workshops, industrial use circumstances, and data sharing with different business specialists and thought leaders. There may also be a networking lunch, an MT Aerospace manufacturing facility tour, and a closing session with drinks and shutting notes.

“Develop your data of DED alongside thought leaders, business specialists, and discover real-world functions that may reshape your perspective.”

You’ll be able to be taught extra right here.

Could 8 – 10: AM Coalition’s Second Annual DC Fly-In

Whereas the second annual Additive Manufacturing Coalition DC Fly-In isn’t till Could 8-10, discounted charges on the block of rooms on the historic Resort Washington finish this Wednesday the tenth. Most of the actions throughout this three-day occasion will happen on the resort, or close by, so it’s an important place to remain when you’re planning on taking part. This occasion, which counts RICOH as a platinum sponsor, is a good probability to advocate on Capitol Hill in assist of AM.

“Be part of us for a really particular alternative to return to DC to fulfill with public coverage leaders in Congress and the Federal Businesses to debate additive manufacturing and the significance of sturdy public insurance policies to advance the utilization of AM for each our Nationwide financial system and our Nationwide Protection.”

You should buy tickets for AM Coalition’s second annual DC Fly-In right here. Don’t delay, charges go up on Friday, April twenty sixth!

April 10: Metallic Binder Jetting with Markforged & Azoth

Additionally on the tenth, you gained’t need to miss the webinar on “Metallic Binder Jetting Course of and Purposes with Markforged Buyer Azoth,” which takes place at 11 am EST. Ross Adams, Binder Jetting Supervisor at Markforged, and Cody Cochran, Basic Supervisor, Azoth, will clarify the end-to-end course of and vital gear, together with instruments to guage how binder jetting can speed up your individual enterprise. Attendees will find out how flagship Markforged buyer Azoth, an engineering and manufacturing providers agency centered round superior manufacturing, makes use of binder jetting to supply verified components for patrons in a number of industries, together with automotive.

“Metallic binder jetting is a production-scale additive expertise that permits producers to economically produce advanced steel components — at excessive quantity. Main producers throughout a variety of industries already leverage Markforged binder jetting options to supply thousands and thousands of precision steel parts. Be part of us on April tenth to see how one can be a part of them.”

You’ll be able to register for the webinar right here.

April 11: Develop Your Information of ColdMetalFusion

At 11 am EST on Thursday, April eleventh, the ColdMetalFusion alliance will current “Navigate with Confidence: A sophisticated webinar for ColdMetalFusion.” That is superb for individuals who’ve already realized the fundamentals of ColdMetalFusion (CMF) and need to broaden their data and experience so as to maximize the advantages of the expertise. A number of matters will likely be lined in the course of the webinar, together with half choice technique and a deep dive into design guidelines by taking a look at real-life functions. There may also be an FAQ session.

“Take part in our interactive and superior webinar and learn to navigate the world of ColdMetalFusion with confidence – dive into the small print of choosing the suitable half and be taught the design guidelines via real-life functions.”

You’ll be able to register for the webinar right here.

April 11: About MIT xPRO’s Additive Manufacturing Course

The Massachusetts Institute of Expertise affords on-line studying applications through MIT xPRO, and also you’ll have the prospect to be taught all about one in all them this Thursday the eleventh, at 2 pm EST. The web certificates course “Additive Manufacturing for Revolutionary Design and Manufacturing” has been taken by 1000’s of individuals because it was first launched. However throughout this week’s free, interactive webinar, “Inside MIT xPRO’s Additive Manufacturing On-line Course,” attendees will hear in regards to the construction, supply, and key studying goals of the certificates course, in addition to who ought to enroll, from AM business chief John Hart, Professor of Mechanical Engineering and Director of the Laboratory for Manufacturing and Productiveness (LMP) and Middle for Additive and Digital Superior Manufacturing Applied sciences (APT) at MIT. Professor Hart may also talk about the historical past and functions of AM throughout industries, and attendees can take part in a Q&A session on the finish.

“Hundreds of execs have joined MIT college and business leaders for MIT xPRO’s Additive Manufacturing for Revolutionary Design and Manufacturing – a web-based certificates course that gives learners the chance to observe AM processes and strategies with cutting-edge CAD and generative design instruments (CAD data not required), in addition to case research, assessments, and instruments.”

You’ll be able to register for this particular occasion right here. This one is to not be missed!

Do you will have information to share about any future webinars or digital and reside occasions? Please tell us!